Features of ultrasonic welding machine for venous catheter and hose:

A new digital energy ultrasonic generator system. Touch screen parameter adjustment, all parameters are adjusted on the machine screen, ultrasonic plastic welding machine, management password protection. It has two welding modes, time and energy, which can be switched at will. Two welding modes are available for selection. The frequency automatic scanning and tracking locking system ensures higher control accuracy of power output and time. It ensures stable operation of quality control function for various products with different requirements and types of equipment welding. It can record 500000 sets of welding data, including welding time, welding energy, real-time frequency, and the data can be exported. Data monitoring function: if each welding data deviates from the set range, the machine will give an alarm, the touch screen data will display NG, and the normal operation will display OK. Other auxiliary tools can be connected externally, such as PLC application automation system device, and an alarm system can be added at the same time. When the defective or suspected parts exceed the set upper and lower limits, there will be an alarm prompt. Ultrasonic plastic welding machine The weldability of two kinds of workpieces when ultrasonic plastic welding machine is used for welding: some of different materials can be better fused, some can be basically melted, and some can not. The melting point of the same material is the same. In principle, it can be welded. However, when the melting point of the workpiece to be welded is greater than 350 ℃, it is no longer suitable for ultrasonic welding. Because the ultrasonic wave makes the workpiece molecules melt instantaneously during the welding of ultrasonic plastic welding machine, and the welding time is within 3 seconds. If the welding is not good, other welding processes need to be selected. Generally speaking, ABS materials are relatively easy to weld, and nylon or PP materials are generally weldable. The welding area has certain requirements: when the ultrasonic instantaneous energy occurs during the welding of the ultrasonic plastic welding machine, the larger the welding area, the larger the energy dispersion surface, the worse the welding effect, and it may be impossible to weld. Because the ultrasonic wave is transmitted longitudinally, the energy loss is proportional to the interval, and the distance welding should be controlled within 6cm. The welding line should be controlled between 30 and 80 wires, and the wall thickness of the workpiece should not be less than 2 mm, otherwise it can not be welded well, especially for products requiring water tightness and air tightness. The output power of the ultrasonic plastic welding machine shall be constant during welding: the output power of the ultrasonic plastic welding machine is determined by the thickness and diameter of the piezoelectric ceramic sheet, processing technology, raw materials, etc. When the ultrasonic transducer is finalized, the power of the ultrasonic welding machine will be finalized. Measuring the output energy is a complex process. It is not that the larger the ultrasonic transducer is, the greater the output energy of the circuit will be, and the more ultrasonic power tubes will be, It needs proper amplitude to output stable power. Shanghai Shuoke Ultrasonic Co., Ltd. mainly produces and sells ultrasonic welding machines, ultrasonic generators, ultrasonic transducers, and ultrasonic molds.

Features of ultrasonic welding machine for venous catheter and hose:

1. A new digital energy ultrasonic generator system.

2. Touch screen parameter adjustment, all parameters are adjusted on the machine screen, and management password protection.

3. It has two welding modes, time and energy, which can be switched at will. Equipped with two welding modes for selection, automatic frequency scanning and tracking locking system, higher control accuracy of power output and time, to ensure stable operation of different types of products with different requirements for equipment welding

4. The quality control function can record 500000 groups of welding data, including welding time, welding energy, real-time frequency, and the data can be exported.

5. Data monitoring function: if each welding data deviates from the set range, the machine will give an alarm, the touch screen data will display NG, and the normal operation will display OK.

6. Other auxiliary tools can be connected externally, such as PLC application automation system device, and an alarm system can be added at the same time. When the defective or suspected parts exceed the set upper and lower limits, there will be an alarm prompt.

7. The imported transducer ceramic chip has strong energy, and the amplitude modulator is sturdy and durable.

8. The high-strength square column and the large frame worktable welded with square steel keep stable and firm without tilting under high pressure and fast operation.

The applied products of ultrasonic welding machine for venous catheter, hose and catheter are as follows:

1. Precision filter: liquid medicine filter, air filter, anesthesia filter, intravenous infusion filter, blood filter, arterial micro thrombus filter, and pump filter.

2. Hose catheter: intravenous catheter, pipette, drip tube, oxygen tube, dialysis tube, intravenous injection catheter and kits.

3. Surgical supplies: blood transfusion bag, infusion bag, laparoscope tube, sterile connector, oxygen cylinder connector, respirator.

4. Containers and vessels: plasma separating cup, flow meter, mobile urinal, culture bottle, urinalysis instrument, medicine box.

5. Non woven products: masks, surgical clothes, shoe covers, skin patches, non-woven hemostatic cotton counting bags, body fluid bags.

6. Bottle closure: dental floss, dilator, artificial nose, bottle piercing needle, telescopic syringe, self sealing bag, drip bottle cap.