Product introduction
1. The frequency division preheating function is used to display the preheating time to ensure better welding effect. The imported cylinder is fast, flexible and accurate, and has the advantages of slow travel and low noise.
2. Imported high-precision clarity controller is adopted to ensure high accuracy of welding temperature, and imported time system is adopted to ensure high accuracy of welding time.
3. The whole machine is equipped with double starting switches such as cylinder limit, buffer limit, adjustable limit, and horizontal adjustable switch, which makes the grating safety protection operation safer.
4. It is not necessary to add solvent, adhesive or other auxiliary products to the welded products of the whole machine.
5. It is applicable to the preheating and embedding of nuts, the riveting of plastic and hardware products can be done at multiple points at the same time, the pressing of breathable film, dust-proof cloth, dust-proof screen, etc., branding, rubber posts, copper nails, and hot melting. The welding head and non-standard equipment can be customized according to the production requirements of customers.

Working principle of ultrasonic welding machine:
When the ultrasonic wave acts on the thermoplastic plastic contact surface, it will produce tens of thousands of high-frequency vibrations per second, which reach a certain amplitude. The ultrasonic energy is transmitted to the welding area through the upper weldment. Since the sound resistance of the welding area, i.e. the interface between two welds, is large, local high temperature will be generated. Moreover, due to the poor thermal conductivity of the plastic, it can not be distributed in time for a short time and is gathered in the welding area, resulting in the rapid melting of the contact surface of the two plastics. With a certain pressure, it can be integrated into one. When the ultrasonic wave stops acting, let the pressure continue to solidify and form, so as to form a solid molecular chain to achieve the purpose of welding. The welding strength can be close to the strength of raw materials.

1.Fusible thermoplastic plastic;
2. The welding time is very short, usually in the range of 0.05-1 seconds;
3. Ultrasonic welding will not produce the toxicity of chemicals, which is a safe welding process;
4. No need to add any adhesive, simple and fast operation;
5. It can be welded to the joint surface through medium such as water, oil, etc;
6. Welding effect, air tight, liquid tight and other sealing effects can be achieved;
7. It can be used for direct and conductive welding;
8. The welding energy varies according to the plastic material, so there is no concern about scars on the product surface. When the harder plastic material is welded, the welding effect can be brought into play.

About Delivery

The products have different types with different production cycles. The product types will vary greatly. Because of customized products and specific delivery time, you need to contact the customer service to determine the delivery time. The time determined at the time of placing the order shall prevail. Sometimes the factory will be busy, and occasionally the delay will be excused

Chromatic aberration

Product pictures are all pictures taken in real objects. Due to shooting technology and time problems, light display parameters and other factors, the color of the received real objects will be different from the pictures. Please take the real objects as the standard!

after-sale service

If you encounter problems in receiving and using the goods, please contact us, and we can provide guidance at any time. If there is a quality problem after receiving the goods rather than a human need to repair and replace them, please take a picture and send it to our customer service, and send it to us after confirmation.