Product Introduction

◆ Transmission noise does not exceed 70 decibels.

◆ Can be adapted to the ambient Humidity: 20% ~ 80%

◆ Can adapt to the environment Temperature: -5℃ ~ 40℃

Air source specification: 4Kg/cm2-6Kg/cm2(about 0.4MPA-0.6MPA).

Power supply specification: 2-phase 220V 50Hz, if there is a special demand, need customer confirmation.

◆ Maximum mold size (L)300MM*(W)300MM*(H)230MM.

◆ Equipment dimensions (L)500MM* (W)450MM* (H)1000MM.

Technical parameters

◆ Equipment starting mode, using both hands to start.

The height of the working table is 750MM. (Seated operation)

Safety: anti-scald safety warning safety baffle.

Equipment Features

◆ Production beat 25S-35S.

◆ The cooling system adopts blowing air cooling.

◆ Mismi original heating device. Temperature control of hot riveting head, with temperature self-check, closed-loop control, multi-point independent temperature control, temperature control accuracy up to ±2 degrees.

This equipment has been used for hot melt riveting in the fields of home appliances, medicine and so on.

Precautions

1. When adding hot melt glue to the glue storage bucket, the pressure retaining switch should be rotated to the pressure relief direction first

2. After pressure relief, open the glue bucket and add hot melt glue;

3. When adding hot melt glue, it can not add more than 7 points of the glue storage bucket:

4, after adding hot melt glue, lock the lid of the glue bucket.

5. Wear safety gloves, goggles and long-sleeved work clothes during operation to avoid body parts being burned by high-temperature liquid hot melt glue or by high-temperature component surface burns.

Since its establishment, Henglixin has been committed to the research and development, production, sales and optimization integration of plastic welding and packaging solutions. The main products are: hot air welding machine, high frequency welding machine, ultrasonic welding machine, ultrasonic tube sealing machine, vacuum forming machine, blister packaging machine, hot plate welding and welding machine.